 |
Effortless bearing dismounting up to 100 kN
The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.
- High load rating of 100 kN (11.2 ton US) makes the puller suitable for a variety of dismounting jobs
- The 3 different arm sizes, with a maximum effective arm length of 200 mm (7.8 in), make the TMHP 10E suitable for use in a wide range of applications
- The self-locking arms minimise the risk of the puller slipping from the application when under load Hydraulic spindle facilitates effortless dismounting
- The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US)
- Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
- Extension pieces of the hydraulic spindle allow quick adaptation to pulling length
- The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it
Technical data:
- TMHP 10E - Advanced hydraulic jaw puller kit
- Contents:
- 1 x arm-assembly stand
- 3 x arms, 120 mm (4.7 in)
- 3 x arms, 170 mm (6.7 in)
- 3 x arms, 200 mm (7.8 in)
- 1 x hydraulic spindle TMHS 100
- 3 x extension pieces for hydraulic spindle; 50, 100, 150 mm (2, 4, 6 in)
- 1 x nosepiece with centre point for hydraulic spindle
- Maximum stroke: 80 mm (3.1 in)
- Weight (complete kit): 14,5 kg (32 lb)
- Cycle life (hydraulic cylinder): Minimum 5000 cycles up to 100 kN (11.2 US ton force)
- Threading (hydraulic cylinder): UN 1«'' x 16 tpi
- Safety valve setting (hydraulic cylinder): 105 kN (11.8 US ton force)
- Carrying case dimensions: 578 x 410 x 70 mm (23 x 16 x 2.8 in)
- Nominal working force: 100 kN (11.2 US ton force)
- Arm set 1 (3 x TMHP 10E-10)
- Effective arms length: 120 mm (4.7 in)
- Width of grip: 75-170 mm (3.0-6.7 in)
- Claw dimensions:
- a = 6 mm (0.2 in)
- b = 15 mm (0.6 in)
- c = 25 mm (1 in)
- Arm set 2 (3 x TMHP 10E-11)
- Effective arms length: 170 mm (6.7 in)
- Width of grip: 80-250 mm (3.1-9.8 in)
- Claw dimensions:
- a = 6 mm (0.2 in)
- b = 12 mm (0.5 in)
- c = 25 mm ( 1 in)
- Arm set 3 (3 x TMHP 10E-12)
- Effective arms length 200 mm (7.8 in)
- Width of grip 110-280 mm (4.3-11 in)
- Claw dimensions:
- a = 6 mm (0.2 In)
- b = 12 mm (0.5 in)
- c = 25 mm (1 in)
|
|
|